Angebote zu "Aeration" (15 Treffer)

Kategorien

Shops

Aeration in Bottom Outlet Conduit of Dam for Pr...
61,60 € *
ggf. zzgl. Versand

Bottom outlet conduits are the most important side constructions in dams which are used to control of reservoir water volume in back of dam, regulation of downstream water right and drain of the reservoir sediment. The Flushing operations to drain the reservoir sediments by high-speed flow in bottom outlet conduits of dams can create cavitation damages in these structures. Experiences showed that the flow aeration can decrease the risk of cavitation damages effectively. The investigations of flow characteristics by numerical methods along with physical hydraulic models can be effective in choosing the best choice for aeration and also decrease extra cost and time of physical modeling. In this research the cavitation occurrence in the bottom outlet of Sefidroud Dam was evaluated with different gate openings using FLUENT software in 3D mode. A method for aeration of this structure concluding aerator ramps on floor and side walls of conduit was selected and then the results of numerical and physical model were compared.

Anbieter: Dodax AT
Stand: 21.01.2020
Zum Angebot
Kolachian Langeroudi, R: Aeration in Bottom Out...
59,90 € *
ggf. zzgl. Versand

Erscheinungsdatum: 02.10.2014, Medium: Taschenbuch, Einband: Kartoniert / Broschiert, Titel: Aeration in Bottom Outlet Conduit of Dam for Prevention of Cavitation, Titelzusatz: Numerical Simulation of Cavitation and Aeration Using FLUENT, Autor: Kolachian Langeroudi, Roya // Abbaspour, Akram // Salmasi, Farzin, Verlag: SPS, Sprache: Englisch, Rubrik: Technik // Sonstiges, Seiten: 124, Informationen: Paperback, Gewicht: 201 gr, Verkäufer: averdo

Anbieter: averdo
Stand: 21.01.2020
Zum Angebot
Sewage Treatment Process At Buddha Poornima Pro...
41,10 € *
ggf. zzgl. Versand

The outlet samples of each chamber such as receiving chamber, filtration unit, grit chamber, aeration tank, settling tank and outlet chamber in the process of treatment of domestic waste water at Buddha poornima project site Hyderabad are collected following the sampling techniques. For the collected samples the parameters analyzed are pH, EC, COD, TS, TSS, TDS, Ammonical nitrogen, Phenols and Metals like cadmium, lead, zinc, nickel, manganese, copper and chromium. The analysis is done and the values obtained in this analysis are compared with Central Pollution Control Board standard values.

Anbieter: Dodax AT
Stand: 21.01.2020
Zum Angebot
Sewage Treatment Process At Buddha Poornima Pro...
39,90 € *
ggf. zzgl. Versand

The outlet samples of each chamber such as receiving chamber, filtration unit, grit chamber, aeration tank, settling tank and outlet chamber in the process of treatment of domestic waste water at Buddha poornima project site Hyderabad are collected following the sampling techniques. For the collected samples the parameters analyzed are pH, EC, COD, TS, TSS, TDS, Ammonical nitrogen, Phenols and Metals like cadmium, lead, zinc, nickel, manganese, copper and chromium. The analysis is done and the values obtained in this analysis are compared with Central Pollution Control Board standard values.

Anbieter: Dodax
Stand: 21.01.2020
Zum Angebot
Aeration in Bottom Outlet Conduit of Dam for Pr...
59,90 € *
ggf. zzgl. Versand

Aeration in Bottom Outlet Conduit of Dam for Prevention of Cavitation ab 59.9 € als Taschenbuch: Numerical Simulation of Cavitation and Aeration Using FLUENT. Aus dem Bereich: Bücher, Wissenschaft, Technik,

Anbieter: hugendubel
Stand: 21.01.2020
Zum Angebot
Alphacool NexXxoS ST30 Schwarz
61,60 € *
ggf. zzgl. Versand

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are designed to be used with 120mm as well as 140mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise, it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.

Anbieter: Dodax AT
Stand: 21.01.2020
Zum Angebot
Alphacool NexXxoS ST30
82,03 € *
ggf. zzgl. Versand

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are designed to be used with 120mm as well as 140mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise, it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.

Anbieter: Dodax AT
Stand: 21.01.2020
Zum Angebot
Alphacool NexXxoS ST30 Schwarz
61,87 € *
ggf. zzgl. Versand

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are designed to be used with 120mm as well as 140mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise, it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.

Anbieter: Dodax
Stand: 21.01.2020
Zum Angebot
Alphacool NexXxoS ST30
82,13 € *
ggf. zzgl. Versand

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are designed to be used with 120mm as well as 140mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise, it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.

Anbieter: Dodax
Stand: 21.01.2020
Zum Angebot